Skip to main content

Connect the Controller to a New Router

Back to Help Center

Reset the WiFi on the controller
– Press and release “MENU” on the face of the controller to wake up the screen
– When the screen lights up, hold down “MENU” on the face of the controller for 3 seconds
– Arrow down 3 times until it says “WIFI”
– Click “OK” when it says “Setup WiFi”
– Click “OK” when it says “Reset WiFi”, this will take a minute
– If the asterisk on the top right of the controller screen is gone then it has reset, if it is still there it hasn’t reset

Reconnect your controller to WiFi using the JellyFish Designer app
– Connect your phone to the JellyFish-xxxx WiFi, Password bigfish10
– Press the “Setup” tab in the Designer app
– Press “WiFi Setup”
– Press “Search for networks” and click on your network
– Type in your Network Password and press connect

– It will say “Configuring WiFi…” and will take about 5 minutes
– An * means the controller is connected and working
– 9 is a perfect connection, 8 is slightly less and so on, a 5 or higher is good